INtools Tips 'n Tricks:
Thanks to Hilman for giving me these tips...^^Create Enhanced Smart Loop wiring connection of FT with remote FI using INtools
Consider we have this kind of connection:
Notes: I was trying this tips using other unit number in INtools existing training project, so the tag number a litle bit different from the pic above. I used 03-FT-1006 and 03-FI-1006. I hope it won't confuse you.
After connect the cable of FT-1006 and FI-1006 on the left side, you must connect each wire of cable FT-1006 JB to the right side one by one, as you see belows:
As you see, the 2nd of C-03-FT-1006 JB wire will appear as SPARE because not connected to proper negative terminal port. That's is the basic idea to use this tips. If you generate the enhanced loop diagram, the loop will not connected properly. How to solve this problem?
1. Double click the screw symbol at terminal number 5, then Terminal Connection windows will appear.
2. Click the drop down menu at signal on the right column
3. Choose 03-FT-1006
4. save and close.
And you will see that the signal is connected...and you can generate enhanced smart loop properly.
have a try...^^
Jumpers J2/3 and J4/5
Panel Strip Report
Enhanced Smart Loop result
posted by Freaky Valentine @ 8:19 AM
